Ny side 1

Ratio

Inlet Flow (max.)

(LPM / GPM)

Outlet Flow Q1

(LPM / GPM)

Outlet Flow Q2

(LPM / GPM)

Inlet Pressure (max.)

(Bar / Psi)

Outlet Pressure

(Bar / Psi)

1.5	8.0 / 2.1	0.8 / 0.21	0.3 / 0.08	200 / 2,900	300 / 4,350
2.0	8.0 / 2.1	0.8 / 0.21	0.2 / 0.08	200 / 2,900	400 / 5,800
3.4	15.0 / 4.0	2.2 / 0.58	0.5 / 0.13	200 / 2,900	680 / 9,860
4.0	14.0 / 3.7	1.8 / 0.47	0.4 / 0.10	200 / 2,900	800 / 11,600
5.0	14.0 / 3.7	1.4 / 0.37	0.3 / 0.08	160 / 2,320	800 / 11,600
7.0	13.0 / 3.4	1.1 / 0.29	0.2 / 0.05	114 / 1,653	800 / 11,600
9.0	13.0 / 3.4	0.7 / 0.19	0.1 / 0.03	89 / 1,290	800 / 11,600

Flow & Pressure

The supplied flow and pressure to the MP-T are dependant on the intensification ratio chosen. The table below shows the flow and pressure for each model. Flow Q1 is when the pump pressure has been reached, and flow Q2 is when moving up the vertical part of the pressure curve. For information on the flow-pressure curve press

The standard MP-T intensifier will provide pressure intensifcation as required. As an option a built in pilot operated check valve, the POV, allows the high pressure side to be relieved through the intensifier. For more information on the POV press

The MP-T is an in-line hydraulic pressure intensifier designed to be positioned in a low pressure hydraulic system, and will provide higher pressure exactly where needed (max.800 bar / 11,600 psi). Having all the required high pressure valves integrated, the need for additional high pressure components is minimized, ensuring a cost effective system. Control of the high pressure side is achieved by valves on the low pressure side through the intensifier, which adds to safety. The MP-T intensifiers are offered with 7 different intensification ratios as standard, with additional ratios available on request to meet most intensification requirements. The compact design ensures easy installation in new as well as existing hydraulic circuits.